REMOTE TV
Home / VIDAA remote, without another app

VIDAA remote, without another app

VIDAA is the smart TV software on most modern Hisense sets. Remote TV speaks to it directly over your home network, so a browser tab is enough to drive the TV.

Last updated 21 November 2026 · tested on a Hisense VIDAA set (43A519EEVS)

VIDAA is Hisense's smart TV platform: the home screen, the app grid, the settings menus, the lot. Every VIDAA set also exposes a local control service that the official handset and the phone app use. Remote TV uses that same service from the browser, which is why it can open Netflix, change the volume or walk through the menus without being an official Hisense product.

How a browser drives a VIDAA TV

Browsers are deliberately not allowed to open raw network sockets, and VIDAA's control service is not a web page. So the remote works in two short hops:

  1. Your browser to the bridge. Each key press is one small request to a bridge running on a computer on your network — the same machine you already leave on, or a spare Mac or Pi.
  2. The bridge to the TV. The bridge holds the VIDAA connection, over the local network only, and forwards the key.

That is the whole architecture. Nothing goes to a data centre, and the bridge does not need an internet connection to control the TV.

What it can control

AreaControl
PowerOn from standby (with network wake-up enabled) and into standby
SoundVolume up and down, with hold-to-repeat, and mute
ChannelsChannel up and down, direct entry with the number pad, last channel
NavigationDirection pad, OK, back, home, and the on-screen menu keys
AppsOpen any app installed on the set, using the TV's own app list
PlaybackPlay, pause, stop, rewind, fast-forward, subtitles where supported

Firmware: why two VIDAA TVs can behave differently

VIDAA has been shipping for years, and the local service changed along the way. Older firmware takes a fixed login; newer firmware expects credentials derived from the set's own clock. Both are handled, and the bridge falls back automatically when the first attempt is refused. What it cannot do is invent a service that a set does not run — a very old Hisense without VIDAA has nothing to talk to.

One more thing worth knowing: the set allows one session per client identity. Two controllers with different identities coexist happily; two that copy the same identity knock each other off. If your TV keeps dropping one remote when another connects, that is the reason.

Setting it up

Join the TV's network, open the remote, and pair with the PIN the TV puts on screen. It is a one-time step. The step-by-step version, including a manual IP and MAC address, is on how to connect your TV.

Common questions about VIDAA remotes

People usually arrive here looking for the VIDAA remote app. The difference is simple: an app has to be installed and updated on every device, and a web page does not. The web page also cannot phone home with your viewing data, because it never leaves your network. If you would rather have an icon, add it to your home screen and it behaves like an app.

Questions

What is VIDAA?

VIDAA is the smart TV operating system used on Hisense TVs. It provides the home screen, apps and settings, and it exposes a local control service that a remote can use.

Does Remote TV work on every VIDAA TV?

On Hisense sets running VIDAA, yes, subject to firmware. It has been tested on a 43A519EEVS. Older firmware and newer firmware use different logins, which the bridge detects.

Is this an official Hisense or VIDAA product?

No. It is an independent, unofficial remote built on the TV's local control service. There is no affiliation with Hisense.

Why does the TV drop one remote when I open another?

VIDAA allows one session per client identity. Controllers with distinct identities coexist; duplicates evict each other.